GT MAX automatic PET strapping tool, 25 and 32 mm, battery and charger

GT MAX automatic PET strapping tool: automatic battery strapping tool for 25 and 32 mm PET strap

Battery Powered
25 & 32 mm Straps
Includes Charger

Варіації SKU: 110095, 110096

Діапазон цін: від 3.999 € до 4.299 €

Експортна ціна без ПДВ • На товар, доставлений на експорт, рахунок виставляється без ПДВ

Додати в кошик Додати до комерційної пропозиції

🔒 Безпечна оплата • Відповідає PCI‑DSS

Наявність Доступно за передоплати 30% · строк доставки (робочих днів): 14
Гарантія 12 місяців Реєстрація в клієнтському порталі · сервіс і запасні частини від нас
Повернення та рекламації Без оплати, якщо товар має дефект, пошкоджений під час транспортування або не відповідає замовленню
Експортна ціна без ПДВ На товар, доставлений на експорт, рахунок виставляється без ПДВ
Відповідає вимогам CE Машини від виробників із сертифікатом ISO
Безпечна оплата Картка, PayPal або банківський переказ

Понад 10 000 проданих товарів по всій Європі Понад 30 років досвіду команди

Артикул

width

Ціна за одиницю

Знижки за кількість

Кількість

Дії

110095

25 mm: GT MAX25

3.999 €

3+	5+	10+
3% ЗНИЖКА	5% ЗНИЖКА	7% ЗНИЖКА

Доступно за передоплати 30% · строк доставки (робочих днів): 14

110096

32 mm: GT MAX32

4.299 €

3+	5+	10+
3% ЗНИЖКА	5% ЗНИЖКА	7% ЗНИЖКА

Доступно за передоплати 30% · строк доставки (робочих днів): 14

Automatic PET strapping tool

The GT MAX automatic PET strapping tool is made for wide PET strap: the GT MAX25 for 25 mm strap and the GT MAX32 for 32 mm strap. Both run on a 36 V / 5 Ah Li-ion battery and seal the strap by friction welding, without metal seals.

You choose the width when you order: 25 mm (GT MAX25) or 32 mm (GT MAX32). Each tool is made for its own width and takes PET strap 0.9-1.3 mm thick. The tool works in automatic or manual mode and needs no metal seals.

What you receive

Battery strapping tool GT MAX25 or GT MAX32. Automatic or manual mode, friction-weld seal, for the width you choose.
Battery. Akku Power SP7, 36 V / 5 Ah Li-ion, up to 300 straps per charge, more than 500 charge cycles.
Charger. For the 36 V battery.

Technical data of the GT MAX

Type	automatic PET strapping tool
Strap	PET, 0.9-1.3 mm thick
Strap width	25 mm (GT MAX25) or 32 mm (GT MAX32)
Seal	friction weld
Operating modes	automatic, manual
Tensioning speed	up to 5 m/min
GT MAX32: tension per strap	up to 6500 N
GT MAX32: tension on the package	up to 13000 N
GT MAX32: tool weight	6.2 kg
GT MAX32: smallest flat surface	400 mm
GT MAX32: smallest round load	diameter 1000 mm

Battery and charger

Battery	Akku Power SP7, 36 V / 5 Ah Li-ion
Straps per charge	up to 300
Charge cycles	more than 500

Where the automatic PET strapping tool is used

The tool is made for the heaviest loads strapped with wide PET strap: steel, paper reels, timber and building materials.

FAQ

Which automatic PET strapping tool should I choose?

You choose the width when you order: 25 mm (GT MAX25) or 32 mm (GT MAX32). Each tool is made for its own width and takes PET strap 0.9-1.3 mm thick.

Can one tool take both widths?

No. The GT MAX25 is made for 25 mm strap and the GT MAX32 for 32 mm strap; you choose the tool for your strap width.

Is there a kit with strap and a dispenser cart?

Yes. The GT MAX kit with PET strap and the PRO dispenser cart is on its own page.

Before you order: the automatic PET strapping tool ships with its battery and charger. Strap and the dispenser cart are sold separately or in the GT MAX kit.

Додаткова інформація

Вага	Невідомо
Width	25 mm: GT MAX25, 32 mm: GT MAX32

What strap widths are compatible with the GT MAX automatic PET strapping tool?

The GT MAX comes in two models: GT MAX25 for 25 mm wide straps and GT MAX32 for 32 mm wide straps.

Can the GT MAX tool use metal seals for strapping?

No, the GT MAX uses friction welding to seal PET straps without metal seals.

What is the battery life and charging capacity of the GT MAX tool?

It uses a 36 V / 5 Ah Li-ion battery that can strap up to 300 times per charge and supports over 500 charge cycles.

Is the GT MAX tool suitable for heavy-duty industrial applications?

Yes, it is designed for heavy loads like steel, paper reels, timber, and building materials using wide PET straps.

Does the GT MAX tool support both automatic and manual operating modes?

Yes, it offers both automatic and manual modes for flexible strapping operations.

What thickness of PET strap can the GT MAX tool handle?

It supports PET straps with thicknesses ranging from 0.9 to 1.3 mm.

Can one GT MAX tool be used for both 25 mm and 32 mm straps?

No, each tool is specifically designed for one strap width and cannot interchange between sizes.

What is the maximum tension the GT MAX32 can apply to a strap?

The GT MAX32 can apply up to 6500 N tension per strap and up to 13000 N on the package.

Is a strap dispenser included with the GT MAX tool purchase?

No, the strap and dispenser cart are sold separately or as part of the GT MAX kit.

Підсумок

Automatic PET strapping tool for wide PET strap
Battery strapping tool GT MAX25 or GT MAX32: automatic or manual mode, friction-weld seal, for the width you choose
Battery: Akku Power SP7, 36 V / 5 Ah Li-ion, up to 300 straps per charge, more than 500 charge cycles
Charger: for the 36 V battery